Tutorial - Frozen Beauty



SUPPLIES NEEDED

 Large Tube of Choice (or large close up image and Tube if prefered) - we are looking for large facial area that will fit nicely in the black area of the template

I'm using a tube that I saw in a tag.  I nearly dropped my cuppa tea when I saw it. Quite simply, it's stunning and I had to get it lol! It's by an artist called ©Sheokate and I purchased it from Elegance Fly but do please feel free to use whatever artwork you'd like and are licenced or have permission for.  Remember, we're looking for a large close up of the face ideally and then the smaller tube version to match.

Made for my tut - simples!

My Template - you can download it by simply clicking on the image above and then right clicking and saving.  Nope, it's not in layers - you're going to be doing all that work, not me hehe! I'm just providing you with the framework.

My Mask - 
Click to download the full sized version


Optional: A few scrapkit bits - at least one paper and maybe 3 or 4 elements in keeping with your tube and tag theme

Filters - Xero Graphics

and for the next filter - I hope you have it because it's no longer available...

Xenofex 1

OR

Xenofex 2


Eye Candy - Gradient Glow

__________________________

Let's start...

Open the Template I provided for you

Press Shift and hold it down and whilst doing so hit D

This duplicates the whole template

Close the original

And using this new one as your tag base

Add a New Raster Layer and move it below the Template layer in the Layer Palette and flood fill this layer a colour of your choice.  Not black or white as you'll end up not being able to see parts of the template lol!

(Tip for Newbs: You move layers in the Layer Palette by left clicking and dragging them up and down - depending on what version of PSP you're using.  Or use whatever way you prefer to move your layers up and down your layer palette is completely fine too)

It's at this point, you might want to Rename your Template layer TEMPLATE in case you get a bit kerfuffled later on

(Yes, ladies and gents, I'm tutting this as we go along...another example of my off the cuff, on the fly, winging it tuttery lol!)

I floodfilled bright pink hehe.

That's better!

So now, here comes the fun...

Open your chosen tube or CU image - the tube I'm using is...MAHOOSIVE!  Love that!

Anyway, whatever you've chosen to use - open it in PSP then

C & P

Move below the template layer in the LP

Place it centrally so that the face "fills" the template area nicely

Click on the Template layer in the LP

Activate your Magic Wand on the traditional settings that I tend to always use - I shall post this screenshot only once lol!  For future ref, unless I indicate otherwise, these are the settings that we'll always have our Magic Wand on -

Magic Wand Settings for my tuts

Fabulous!

So, with the Template layer active - click inside the Black area once

Then Selections, Modify, Expand and change the Integer to 2

Selections, Invert and hit Delete on the tube layer in the LP

Then Selections, Invert to return to just having the template area selected

Now, go to Load/Save Selection - Save Selection to Alpha Channel

And it'll look something like this - 


Click Save to Save the selection
and now you can Ctrl + D to Selections, None

And we're done for that part.  Save your work now if PSP has a habit of shutting on you.

(I have 5 different versions of PSP on my comp and some of the newer ones delight in shutting on me at key moments in my tagging...and no, they aren't "hooky!" lol! Legit only, missus!)

I digress...on we go...

Highlight the Template layer in the LP

Crop off the excess tube
(if your tube is massive, it's all still lurking outside the edge - you just can't see it lol!)
So, crop the whole canvas to a more manageable size to get rid of the 
excess tube
Then go to Image, Canvas size
and change it back to our original working size of 750px x 525 px
Nice and tidy now with no excess tube

So, now back in the LP

Duplicate the Tube layer

and using the top tube layer

Adjust, Gaussian Blur, 5.00

then - Selection - Load Selection from Alpha Channel

And there are your dashes back again, selecting the area we are going to 
apply the filter to.

So now - choose whether you'd like to apply Xenofex 1 or 2

If using *Xenofex 1 - apply SHOWER DOOR on Dot Size 7 and Random Seed 50
(These came up as the defaults)

Once applied - keep selected and go to Edge Effects, Enhance, Enhance More

and then change the Blend Effect in the LP to Hard Light or something equally dramatic for your chosen tube

Whaddaya think?

No?

OK - maybe try out Xenofex 2 instead - simply hit the PSP UNDO arrow
until you're back to just the Blurred layer status you had a moment ago - 
Go to Xenofex 2
and apply the CRUMPLE effect on the HARSH FOLDS preset
but change the tick box to Seamless Tile

Apply
How frosty is that? lol!
Which did you prefer?
If you liked the first one - simply hit the undo arrow once more in PSP
'til you get back to the Blurred layer

and then
and reapply the Xenofex 1 effect

However, If you liked Xeno 2 - then you're fine, you've done it.

TIP: If you have NEITHER of these effects, find a plug in or filter that you DO have
that applies a crumpled papery type effect to your image
I'm sure there are many others that do a folded paper/similar distort.
If any of you know some, please do let me know and I'll recommend to my tutty lovelies!
I can think of Filters Unlimited 2 - Paper Textures
I'm sure there's a papery crumple in there.  Try that, maybe?

OK so now - we have a frosty background
with the area still selected?

Excellent!

Add a new layer in the LP just above the background coloured layer
and floodfill the selected template area with a fill of your choice - 
it may not show at all but in case there are any gaps 
it tidies the area nicely.
Once applied you need to 
add a new layer above all the others but below the template layer
and
go to Effects, 3D Effects, Cutout
and apply


Once you've done this - you can hit Selections - None!

OK - so now you've got some work to do.

I'd like you to duplicate your original large tube layer, please.
Place it within the two white template boxed areas as to your liking
Whatever looks best.
Then apply finishes of your choice as shown in the processes above.
So, you can Xeno 1 or 2 or you can just Blur and soft light it
or whatever you'd like.
Don't forget to do a new cut out layer for the internal shadow
and don't forget this is ALL UNDER the Template layer in the LP

(I went for an eye shot and lips shot - 
I did this by duplicating the tube layer twice, placed as liked then
then did a Magic Wand Invert Delete to get rid the excess areas
- I also reapplied the Crop to the canvas just in case I needed to - which I did because
I went to blur the new layers and yup, up they blurred up in the edge area lol!
I then merged these two together for easy application of filter and
and did the Blur as before - then this time I went for Xeno 2, Shower Door, Hard Light for these image sections, went to the LP and hit Hard Light - tada!)

OK - nearly finished now...
For the next filter - Eye Candy 5 - Nature - Icicles
Look for the preset called Large, Icicles, No Refraction
and apply this to the Template layer
(If you don't have this filter, I've supplied the template with icicles
Click on the image above, then right click and save this PNG to your computers
Open it in PSP and match it up beautifully to your current template layer
above it in the LP of course - then
Once aligned properly, you can delete the first template if liked

Now open your tube and resize to apply to the tag
My tube was delightfully massive - love that!
so I resized by 30% and then by another
60% to get it tag sized
C&P
Place where liked within tag area
I went for dead centre
Niiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiice!

OK
So then I duplicated the tube
and on the top copy
Adjust Blur Gaussian 2.00
then
Xero Graphics, Fuzzifier on these settings


then change the blend mode to suit your tube and how dramatic
you want the finish
(You want a frost kissed effect but not so much that the beauty of your
tube is compromised!)
I ended up with Soft Light on 53

Once applied
Add a favourite tube shadow to the bottom tube layer only

And now to finish off - it's over to you!
You can add some elements from a scrapkit to decorate the background
or foreground
Some papers and a mask if liked for the background

OR

Keeping it simple - like I did hehe
I added a new layer below the main tag layers in the LP
Floodfilled with a FG BG gradient in two colours
from the tube
then I applied my mask 

Time to finish off
Choose a favourite or new font to use!
Black with no stroke
Add the name - I'm adding Nae as she was the first follower on this new blog :) xx
(Rachey - you're next lol!)
I then added a Gradient Glow of choice
Shadow of choice
Added the tagger and artist info
Deleted the bottom background layer
Save as a .PNG

And there you go!

I hope you enjoyed this tutorial
and have fun making it

If you'd like to send me your results, I'll pop them below here for
people to see



This tutorial was written 13th January 2021 by Vix aka VixPSP
All usual disclaimer notice and terms of usage apply
Thank you