Showing posts with label Advanced XP. Show all posts
Showing posts with label Advanced XP. Show all posts

Friday, 16 April 2021

Tutorial - Purplefantastical


NOTE - UPDATE 1st October 2025
I just received a note from Google telling me they UNPUBLISHED this tutorial as it had been flagged for review. Apparently, it was deemed to contain SPAM.
No spam.  All the links that were here were links to legitimate sites of interest.
There was only one change I made to this tut yesterday to re-link to a new blog for the mask and BAM!
Flagged.

This is the first time in over 15 years of having Blogger that this has ever happened to me on my blogs.
I do not deliberately link to iffy sites, I do not deliberately link to spam sites.  
So, dear Google reviewer, I hope this tut now passes the test.
Oh and one more thing my PSP chums.
If web crawlers or bots flagged this tut page up and found it unpalatable - then fine.
But, I find out a human being actually reported me for linking spam...that is not true and karma is real.

In the interests of keeping this tutorial and hopefully having reinstated - 
I have now removed every link from this page.
If you need to find and source the materials I used -
 please read the names and places below and find your own way there.
Perhaps try using Google to find them.

(I do find this very coincidental that it happened when it did and I shall be watching for any future nonsense such as this)

Yeah, I'm annoyed.

OK - on to the tut...




This tutorial is written ideally for taggers who enjoy using effects/filters and have some reasonable confidence working with layers and understanding of placements/positioning without the need for repetition of instruction ♥ and understand my lunatic babbling.  Thank you :) xx

Tube - I'm using a completely gorgeous one by ©Goldwasser which comes as part of a scrapkit by Bella Caribena called "Fantasy Land" which I got from Dreaming with Bella

For this tag you will need a LARGE tube like this so any large tubed artwork would be ideal

Lots of Filters - You will need
VM Toolbox
VM Extravaganza
Mura's Meister
Eye Candy 4000

Mask - I'm using a gorgeous one by Vivienne from Vivienne's Digital Tagging - you can find it at her site 
It's Number 0087

Fonts - I'm using a freebie font from Creative Fabrica called "Engine"

But - 

Of course - as always - use whatever you'd prefer or have to hand to make your end result different.

(See my update note above the tag example to explain why nothing is linked!)

♥

Open a New Image 
650 x 510 pixels @ 72 dpi

C&P your chosen large tube close up

Centre within the tag canvas area

Crop to canvas size

♥

Duplicate the tube layer

On the top copy

Adjust, Gaussian, 5.00

Change the BM to one that suits your tube

I used Overlay but that was too harsh so I dropped the Opacity of the layer to 50

Just right!

So improvise but bear in mind not to distort or destroy the essence of the artwork.
Dramatic can look nice but not if you make the original art look...yikes! 

♥

Add a new Layer

Below the Close Up

FF (Flood fill) with a gradient to compliment the image

(I used my old favourite FG/BG angled at 45)

Hide this layer in the LP

Right Click on the bottom copy of the tube

Merge, Merge Visible

Right Click again

Duplicate

Now you have two copies of the tube and one hidden gradient layer in the palette?

Cool

♥

On the top copy of the tube - go to Adjust, Blur, Radial Blur and apply my setting - 



Once applied

Right Click on this effect layer in the LP and choose Duplicate

On the top copy - VM Toolbox - Instant Tile on - 

X Flip - 77
Y Flip - 31

(Default Settings I think?)

Now move your tube layer to the top of the LP
Right click to Duplicate
then HIDE the top layer for now and
on the lower copy
Apply the VM Toolbox on the same settings to the lower tube layer that you just applied
to the swirl layer
SPOOKY!
♥

Now UNHIDE the Gradient Layer...lol!  Remember that one right back at the beginning
OK
So with your top layer (your complete Close Up tube layer) hidden
Right Click on the Gradient Layer
Merge, Merge Visible

Which should now leave you with two layers - the layer with 4 faces etc and your tube face layer

Excellent...right, I need a cup of tea, I'll be back in a minute...
I'm writing this tut on the fly - it's Thursday afternoon, the sun is shining, I had no idea where I was going with this tutorial and it's just come to me, so need a cuppa and then we'll carry on...back in 10 xx

♥

I'm back :)
Here we go then

Duplicate the 4 face layer you just made and hide one for later

With a dark colour from your tag set in your top box (Materials Palette)
and the bottom box set to 0/nothing/null
Go to Preset Shape Tool, choose Rectangle
and then adjust the Horizontal and Vertical Radius to 30.00
the Line Style to Solid
and the Line Width to 12.00
(We're creating as a Vector)

♥

Now back over to the working tag canvas
We are going to draw a rounded edged vertical rectangle shape - see my tag for reference
Starting with the first face area but further over (so top left of the tag canvas)
Draw out your Rectangle layer top to bottom for the sizing and then across for the width
and use the centre of the swirl 
as a guide as to where to stop
(I had a diamond shape right in the middle of my tag so I stopped just before that)
Again see my finished tag for an idea of sizing
If you don't like the size of it - hit the Undo arrow button and try again but
Once you've drawn it out to your liking
Objects
Align
LEFT
and then
Over to the Layer Palette and on the shape layer, Right Click
and choose 
Convert to Raster Layer
then
Right Click, Duplicate the shape layer
and then Image, Mirror, Mirror Horizontal

♥

So now we're going to select the inner area and make some adjustments - 

Using Magic Wand on my usual settings for selecting parts of images 


Click inside the shape to the left of the tag canvas

Selections, Modify, Expand by 2

Activate the bottom Merged 4 faced layer in the LP
then
Selections, Promote Selections to Layer
Keep Selected
Layers, 
New Raster Layer
(this is still below the left "frame" layer you just drew)
and go to Effects
3D Effects
Cutout
on this setting of mine - 


Selections, Selection None

Repeat this last section from the heart down so you have the same on the right hand side of the canvas too...

Your working canvas is now full of layers, shadows, duplicates and gaaaaah!
Don't panic, we're going to tidy things up lovely now...



Tip: At this point - Save your work as PSPImage rename your canvasses in the Layer Palette - call the one that you've done all the work on, WORKING CANVAS or something like that and then
(I'm currently working big at the moment because I likes it - so I went for 850 x 600 pixels @ 72 dpi
HOWEVER!
You choose whatever sized you'd like - bearing in mind to adjust the percentage of resizing accordingly for your own tag from this point on if you start any smaller than me - okely?
Great
So - floodfill your chosen image size with a layer of White

Then save and rename this canvas TAG CANVAS

OK?

♥

On we go

Back to the working canvas - find the 4 faced layer (there's two copies floating about - a hidden one at the top and the bottom one you just promoted two layer from

C(opy)

and then

back to the new image

P(aste) as a New Layer (always as a New Layer unless stated otherwise)

Layers, Load Mask from Disk
and apply
MaskVivienne0087 to the layer (not the canvas, the layer)
Layers, Merge Group

Once you've applied the mask - ensuring it doesn't look distorted for your tag size and making sure it's not touching the edges of the canvas?
(use Objects, Align, Centre of Canvas if possible)

Back to Working Canvas
Click on the left side rectangle shaped layer to activate it in PSP
Then
Layers, 
View, 
Current Only
And
UNHIDE - the Cutout Layer underneath and the the promoted 4 face (or rather now, the 2 faced layer)
layer section
Layers, Merge Visible

Hide this layer now and

Repeat this step for the right hand side - the rectangle, the cutout and the promoted area for that shape

So now, you should have two separate layers of merged rectangle?

Click on the left layer frame with Magic Wand using our settings as before
and 
apply Eye Candy 4000 - HSB Noise - on the default settings - Settings, Reset to Factory Default
Selection None

Repeat this effect for the right frame

Now 

C&P the left frame 

Place it centrally on the Tag Canvas

Objects, Align, Centre in Canvas 

Repeat this for the mirrored template (which is currently the right side of the working canvas) layer and paste as a new layer above the others

Again use Obj, Align if needed

So your Tag Canvas should look like this now - 


♥

Activate the right side template section layer - i.e. the section of the 4 faced image that is facing the same way as your mask layer on the right (check it) and make sure it's on the top of the LP

On this layer - apply VM Extravaganza Transmission on these settings - you MAY need to adjust the number sliders for your own creation line up (in fact, I'm pretty sure you will) but you'll get the idea...


(You're looking for a pleasing "split" of the sections - so that's your Line Width to adjust and then the Offset is how far out you want the pieces to spread - so keep jiggling the sliders and look at your Preview pane to see what's happening.  Contrast is the Transparency of the layer and we don't want any so move that to 0)

Once you've got it how you think you like it - click OK

If you don't like the result in the "flesh" - hit the Undo arrow button and reapply 'til liked :)

♥

Once you've done this

Hide the untouched template portion in the Layer P

Now - take your Move tool - and move your mask layer over so it lines up under your right side template layer to "complete" the top face
I only had to move mine over to the right a little 
and then check for jiggle lag (as I call it)
Basically, turn your top template layer on and off a few times to see if there's any jiggle - this will show if it's aligned up nicely or not
(You can also do this by lowering the opacity of the template layer - your choice!)

Once aligned?

Move the left side template up the Layer Palette to the top

Duplicate the Mask Layer
Image, Mirror, Mirror Horizontal

Now - reapply the Transmission to the Left Side template layer
You won't have to the move the mask layer on the left as chances are (like mine) it was already 
lined up (aligned) with the template face
If yours isn't...move over to align

PHEW!

♥

Right - here's where it gets grooooovy.

IF like me, you're quite old school and love a simple effect tag now and again - you're getting a bonus.
Read on...

Go back to our WORKING Canvas
On the layer we created pretty much at the start, the large close up, original face layer?
Making sure it's at the top of all the other layers in the LP and then leaving it highlighted/activated
Load/Save Mask, Load Mask from Disk, find your Vivienne_Mask0087 as before to the face layer
And
Apply, Layers, Merge Group (not Visible)
then 
COPY the Mask layer from the working canvas and Paste as a new layer above the others on the Tag Canvas

BOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOM!  Lightbulb moment...
I thought it looked lovely like that loL!  (Save there if you'd rather - no probs!)
But either way - 
Save your Progress as PSPImage on the Working Canvas as that's it -  for now!
We shall come back to it another day...yes, really.
So, keep it safe for now.  And let's work on this one.

Moving on - 

Your Tag Canvas image should now look like this in the LP - or something like - 

Here's where your taste/creativity comes into play!

HIDE the Left Side Template Section layer by clicking the EYE or whatever you have to do in your version.
It should be perfectly aligned with the right side one

Which tube direction looks best for your tag?
You choose
Hide and Unhide a few times to see which you like

I'll admit I liked mine the way it was so I left it

Hide your Large Masked Face Layer for now

Open your Brush Tool
In the MP - have it set to the Dark Colour we used for the template frame in the top box and nothing in the bottom box
In the Brush Settings - have it set to this - 


Zoom into 200% on your canvas so you can see better and on a New Layer (as always with brushwork unless stated otherwise)

At the top left of your canvas - if yours looks like mine we're going to draw out a line
Don't panic!  It's easy - 
Tap once to dab your brush square lined up with the template area - 
The HOLD DOWN Shift and dab your brush once more at the END point 
i.e. we're drawing a straight line to cover the raw edge (which I've decided I don't like lol!)

Ta-da!
You should now have a perfectly straight line piece? 
Lined up beautifully to cover up your edge of the top left piece of template?
(IF you've got weird ladder zig zag effect, it means your end point doesn't quite line up so undo
and have another go - when you've got it right, your line will be smooth from point a to b)

Excellent!

Reapply the EC 4000 HSB Noise on the default settings (as we did for the template frame)
Now
Duplicate this line layer and go around the canvas duplicating and lining up as many times as you needed for your split (I needed 10 pieces of line so I remained Zoomed in and went around the canvas right clicking to duplicate and then moving the pieces around to LINE UP perfectly - you will need to zoom in for this to get it right on the dot!)

♥

Hide the White Background
All THREE Mask Layers
and
then Layers, Merge, Merge Visible

Unhide your layers

Time for fonts and whatnot - yes, we're nearly finished! :)

Text Tool
I took the Engine font
Dark Colour Top Box of MP Stroke 1.00
Lighter colour from tag Bottom Box of MP

Size 96 Pixels
Create as Vector

Type out some wordage that will suit - I went for MIDNIGHT
Placed top left 
Moved below below the face mask and template layer
Convert to Raster

Go to MP - hit the Swap Colours arrow

Repeat the word or use a different one

Place to the right - see my tag

Repeat this for the last two sections

then I used a different font (Steelfish) and changed the kerning to 450
(With my PSP I selected the Text and then adjusted the Kerning to the width I liked by
watching it apply in real time but if you're using an older version, you may need to try it a few times
until you get the spread you like - be nice to the font though, don't make it look weird loL!)

Convert to Raster when done

Now - apply a drop shadow to the wording and template layers only - do not add to any of the mask layers

I used


(Note: for extra whoosh, I added a scripty font with the name in a lighter colour and applied the same drop but this is optional

Add your CR INFO - Tag Info etc. as needed

Once done - delete the White Background layer

Go to the Crop Tool and look for Snap Crop Rectangle to:
Find Merged Opaque
and my canvas size dropped to 
780 x 546 - Not bad!
I pulled the top and sides out a little in case they were touching shadow
and then ticked to Crop

Hold Shift and hit D to duplicate the entire image
and on the duplicate - Layers, Merge Visible
Save as PNG

Back to our TAG CANVAS image
Click on the Red X to Close - 
And hit Yes to save changes.
DON'T DO THIS IF your PSP doesn't OFFER to save changes to your files
If it doesn't do this on a default basis, simply Save As like you usually would for a PSPImage
and Save it as one.
We'll revisit this another day :)

Anyway, for this tag, that's it.
I'd love another example to show so if you do the tutorial and make something?
Please send it to me and I'd love to add it to this page :)

Thanks for looking and happy tagging xx

This tutorial was written 16th April 2021 by Vix aka VixPSP
All usual PSP tutorial disclaimer notices, conditions and terms of usage apply
Thank you

Monday, 25 January 2021

Tutorial - Sweet Memories



SUPPLIES NEEDED

 Tube of Choice - I'm using a beautiful one by © Anna Liwanag which I purchased from CDO and am using with licence.  If you don't have or wish to use the same tube, use one that you have permission or licence to use.

Lots of Filters - including

Mura Meister Copies

Graphics Plus - Quick Tile 1

Eye Candy 4000 HSB Noise

Xero Greytinter/Scaler

Toadies - What are You?

Jeux de Lignes Entrelacement

♥

Ready to rock 'n roll?

Let's do this thing!

Open a New Image in PSP - 650 px by 550px at 72 dpi

Open your chosenTube

C&P at full size

Place on the working canvas/tag area/call it what ya like

Mura Meister Copies - Wallpaper - default setting

Once applied - Crop Tool, Crop to Merged Opaque (i.e. the current image size of 650 x 550)

Duplicate the layer

Top Copy - Adjust Blur Gaussian 2.00

Change to Soft Light or similar

Apply Xero Greytinter on 0 or Greyscaler - same effect on those settings lol!

If you then turn the opacity on and off between the two layers

you'll see the difference is subtle - only subtle as the tube is gorgeous

and doesn't require much floof!

Hide White Background

Merge Visible to the two wallpaper tube layers

Unhide

♥

Now have your Selection Tool on Square

Starting at the top left of the tag area

Draw out a Square and keep going until you're about 8 pixels or so away from touching the bottom of the image canvas

Go to Selections, Edit Selections and you'll see it's gone Red and the little vavavoom lines aren't dancing about around the outside of the selection at the moment.  That's fine.

Now go to your Move Tool

Tap on the Red Area and move the redness more into the centre (or any other part of the working canvas where the Wallpaper has highlighted a part of pretiness or interest - just make sure it's still all within the tag area i.e. we can see it and it's not outside the canvas.)

Once you've placed where you like - return to Selections and in the DD menu hit Edit Selection once more.

The redness will go and the voom lines are back!

Making sure you're on the layer in the LP - Selections, Invert and hit Delete

Selections None

Now go to Objects - Align - Centre in Canvas

♥

So now we have a nicely cut "background" to work with and the White Background showing

On the working background layer

Duplicate

Hide the bottom copy and with the top one active

Go to Graphics Plus - Quick Tile 1 - on the default settings

(all three sliders will be on 128)

Apply

Now, resize this layer in your Image, Resize by 80%

Then back into Graphics Plus

and reapply the same filter as before


You'll now have 4 squares of 4 squares?
I hope!

If you haven't - try moving the QT sliders until you get something similar
but I am hoping that the GP plug in is set so the thresholds of tiling are the same
regardless of image used etc.
See how you get on...fiddle about until it looks like mine..ish!

♥

Duplicate this layer

and on the bottom version of it
In your Materials Palette
Change both of your colours to White
then go to 
Toadies - What are You?
and at 20 on X Dose and Y Dose sliders (default)
Apply
then go to 
Jeux de Ligne Entrelacement
and change the Espacement Slider to 25




So now, unhide the other Quick Tiled layer

Pick a colour using your Dropper tool - I went for a lovely shade from my tubes hair
#9f7d6f

Take your Preset Shape Rectangle with the Line Width of 9.00 on Solid Line

On the Right side of your tag

Top Square area - Top Left of Square with the 4 sections layer as a guide

Draw out a Square shape

Once drawn out and converted to Raster

You can then jiggle it about to line it up a little more if liked

Then

Right click on this layer in the LP

Image - Mirror - Mirror Vertical

It should like up with the bottom right square area

Again, if not, jiggle it a little so it does

Repeat this step for the other two areas

SO you now have four rectangle frame layers
beautifully framing the effect main areas?

Good

Onwards!

♥

Unhide the copy of the first "background" layer we used
With one of these layers
making sure in the LP they are below the 
other effect layers
Move it within the right top square area
Do a Magic Wand Selection in both the TOP and BOTTOM right 
areas and Invert, Delete to cut the image

You can - if you'd like - for complete symmetry, duplicate the working background
cut area and mirror place on the left
but I liked some of the effect showing so I left it

♥

Taking your Rectangle Shape again

This time with the Fill on a variant colour for your tag
I went for a nice Caramel to compliment my first colour - so this
one was #c7b3ab

Look to your central tag section
And draw out a long vertical rectangle for the central tag area
Go from top to bottom and line up with the thick lines from Entrelacement
for placement...boom boom!
OK
Once you've done that
Convert to Raster

Swap your colour in the MP - bottom box
to either White or Black or a colour of choice
No Stroke
Take a nice Sans Serif font
(I used Poppins - Size 26
and the words Memories Sweet Memories)
Create as Vector
Type out your chosen words
Happy with the Length of the Text to Rectangle Ratio?
Convert to Raster
and Rotate it to place over your middle vertical rectangle area
Once you've done that - apply a crisp drop shadow to the text
(I used 1, 1, 21, 1.00 Black and applied it twice)

♥

At this point - IF you like much bigger tags - resize your working area as liked
OK?
So now - 
Open your tube (if you closed it)
Copy
Resize as preferred
and place where liked on the canvas

If needed, do a selection invert delete on a duplicated
tube to make it look like it's emerging from your frame
But if you use a full bodied or sitting one - do this or not - it's your choice :)

On the Opposite side where you've placed your tube (so mines on the right)
C&P the larger or CU version if you have one
Place within the frame area
(and in the LP it will be BELOW the frame layer but
above the other effect layers)
Once placed
Do an Invert Delete
Change the Blend Mode something that compliments
your tube
I went for Hard Light
and dropped the Opacity to 59 
then
Duplicated
and on the 2nd copy of this layer
changed the Opacity to 24

♥

Finishing Touches now!

Do another Merged Opaque crop - i.e. Crop your canvas to the size you want it for tags
Sharpen anything that needs sharpening only if needed
Then - add some noise to your frames using
Eye Candy on these settings

Hit Random Seed before you apply it
to each frame to give a different swoosh

I then glittered up my frames using 
Adjust Add/Remove Noise/Add Noise/50 Gaussian Monochrome Ticked
but you can go madder or more subtle if you'd prefer

Apply a subtle dropshadow to the frames and the middle rectangle layers
I used the same as before

Add your name in a font of choice with a drop of choice
and place where it looks best on your tag

Add your Artist © and/or licence info and your taggers info

Delete the White Background

Shift and hold D to duplicate

Save that duplicated one as a PNG

and

Save your ORIGINAL one as PSPImage in case you
need to come back, make changes, add names for offers etc.

That's it!

Hope you enjoyed this tutorial and if you make one and
would like to show me?
Smashing!
I'll add it to the bottom of this page if it's beeyoooooooutiful too :D