Showing posts with label Verymany. Show all posts
Showing posts with label Verymany. Show all posts

Friday, 18 June 2021

CT Tutorial - Carnival Queen



CT Tutorial made for the lovely Shani at Wicked Princess Scraps

 Artwork © Verymany used with licence

Tube is called "Summer Carnival" and is available at VMT Store.


This gorgeous kit match which you'll need for this tutorial is Carnival Cutie


Click on either the tag or the kit preview to visit the store for more details - 

SUPPLIES you will also require

Xero Graphics Greytinter (sadly, their site is no longer available but they encouraged redistribution of their plugs so somewhere else may have these free filters)

L&K Filters - Pia (again, I can't find the original download source so hopefully you have this one in your collection)

Weescotslass Mask - 391 - by Chelle 
(Go to Chelle's site - look on the left and you'll see her masks are in bundles to download - you're looking for WSL_Mask391

Gradient Glow or Corona (optional)

Level of PSP Tagmaking Experience - Good to Intermediate

♥

Open a new Image in PSP - 750 pixels wide by 900 pixels high @72 dpi

FF the background layer with White

C&P your large tube close up (CU - not commercial use, CLOSE UP lol!) as a new Layer

It should - like mine - automatically place where needed and look ready to go

If not - Objects, Align and Centre in Canvas :)

♥

Then C&P the tube layer as a new Layer

Move over using the Move tool and move to the left - jiggle and line up as mine or similar

if you're using a similar tube if needed

Move down the LP (the Layer Palette) to underneath the CU layer to the left

Duplicate

Image

Mirror

Jiggle and line up as mine

Duplicate the CU layer

move down the LP to just above the White Background layer

♥

Open Paper 8

Copy the Paper

Back to the tag and 

Add a New Layer

Selections, Select All

Edit, Paste into Selection

Selections None

Change the Blend Mode in the LP to Hard Light (or change it 

for your own needs depending on the paper pattern or tubes you've used)


Layers, Merge Visible to a New Layer

Move this UP the LP to the top above the other layers

Duplicate this merged layer and hide the other layers except the Merged ones and White FF

♥

Hide the bottom merged layer leaving the White FF layer unhidden

On the top merged layer in the LP - apply the mask WSL_391

(Make sure you apply it as Fit to Layer)

Layers, Merge Group

Unhide the other Merged Layer in the LP

To this one apply Xero Graphics GreyTINTER with overall tint slider on 80

Apply

Duplicate this layer

and on the top copy

Apply the L&K Pia (the checkerboard/chequered board) filter with the slider on 70

and change the blend mode to Screen

♥

In your layer palette now, you should have from top down

The Masked Merged Layer

The Screened L&K Pia Merged Layer

The Tinted Merged Layer

Yes?

Excellent.

♥

So on the Screen L&K Layer - activated in the LP

Take your Eraser Tool on these settings - 


and now gently and carefully erase away the screen layer at the bottom which is not really needed
as the paper provides a fabulous chequered floor already
You just want to blend at the edges and make the transition look more fluid

Like it?
Good

♥

Once you've done this
Hide the White FF (if not already done)
and Merge All Visible Layers

Delete the spare tube layers now and
any spare background layers you may have (?)

You're merging the three layers we already merged to one main layer

So now you have One Merged Main Layer
and
the White FF Background Layer

♥

At this point RESIZE as you'd like

I went to Resize by Percentage and chose 60% - so I resized 60% All Layers

(Careful with the Sharpening - make sure the image still looks good and is not too blurry OR too crispy)

Then

Hide the White FF

and 

on the Merged Layer - apply Picture Frame as follows - 


Then

Merge the Picture Frame and the Merged Layer VISIBLE

then go to 

Image, Canvas Size 

750 pixels

by

700 Pixels

Unhide the White FF 

and Floodfill this layer once more with White

♥

So now here come the lovely bits - elements and such!

Please see the name of the element and the percentage number
then see my tag example to see if I moved it, placed it,
duplicated, mirrored, flipped, 
placed above or below the main image framed layer -
to save me repeating myself 😊 and help my aching fingers loL!

SO, as this is a tutorial, please feel free to either copy MY example tutorial tag on this page above exactly or improvise with whatever you're using
(Once you get a feel for your scrapkit, you can usually guess what you need to resize by...)

Oh and Shadowing - 
TIP: Shadow as Needed as you Go along otherwise it's a bit of a bind having to do it all at the end.
I used 2 - 2 - 53 - 9.90 - Black



CROWN               Resize by 80%        Move, Mirror, Duplicate And/Or Place as Needed
FLOWER 21        60%                       
LEAF1                 60%
LEAF4                 60%

Image - Canvas Size - UP WE GO To...


Make sure you select the top middle as the placement for the tag image 

Onwards!

FF White the Background once more and zoom in if you need to - I like to see what I'm doing so I'm keeping it as it is

On with the elements - 

BANISTER        50%        Move and Place as Mine        Good Deep Shadow
BORDER2         65%        Line Up at Bottom as Mine
CLUSTER4       30%        Line Up at Bottom Left and Duplicate as Needed
MASK6           NO RESIZE    Check my Tag to see the Layer Placement (just above White Back)
MASK5            40%        Place as Mine
BIRD3             NO RESIZE    Above the Blue Leaves layers
GLITTER        NO RESIZE    Place just above White Back


Your Full Body Tube - I resized mine by 50% of it's size and placed as seen.
I added a favourite tube shadow of mine, nice and deep so it looks realistically vivid

Add some Wordart if liked and place - I added some and rotated to the right, moved up the LP

Add your Name and place - Add Gradient Glow or Corona in a contrasting colour for pop!

And then finally - RESIZE once more if you prefer a much smaller tag

Crop any excess canvas if needed

Add your Artist CR Info - Licence Number - etc

Delete the White Background

Save a Copy as PNG and Save your Layered Version as a PSPImage so you can go back to it
Amend it and Add Names etc if liked

That's it!

Hope you enjoyed it xx

Thursday, 28 January 2021

Tutorial - Steam Dream

 Steam Dream



Tube/Image © Verymany used with licence

Scrapkit "Steampunk Mysteries" by Curious Creative Dreams

Both of these are not to be used without licence or purchase so if you don't have these particular
designs, then improvise with your own collection

Template - I made a very quick simple "template" purely for this tutorial from one of 
Shawna's PSP shapes. (Scrap Stuff with PSP)
It asks for a mention in the TOU which I'm doing (Thank you, Shawna) and I would direct you to download the shape yourselves but the site hasn't been updated in 11 years and many of the links no longer work - so for speed, ease and the purpose of this tut, I've templated this shape only xx

You can get it by clicking on the image below and then right click save


Fonts of Choice

♥

Find whatever kit you choose to use
and use my tutorial as a guide/example for placement and resizing's
Look for a kit which is similar in element types along the same
theme lines and you should be fine

Please assume that if I mention an element in a 
tutorial step (and it's ending up on the tag canvas)
How does it get there every time unless otherwise stated?
Exactly - lol!
C&P
So, do that :) xx  every time!

(This will be the most detailed of the scrap tutorials on this new blogsite
 - so you can refer back to it in future as I will shorthand it from now on)

♥

Open the Template I've supplied

Open your chosen large image

Copy and Paste onto your working canvas

Rename your template layer TEMPLATE or similar - you'll be glad you did and you
can use it as a reference point when moving stuff up and down the LP (Layer Palette)

Line up the image with a "point of interest" somewhere well within the diamonds area

(For instance, on mine, I used that gorgeous choker stone in the bottom left as a guide)

(Tip: Keep your Image in your Clipboard so you can keep pasting as needed)

Now - taking magic wand on the usual Selection settings



Select inside the three diamond son the left side from top to bottom vertically

Selections, Expand by 3, Invert and hit Delete the excess Image on the layer

Selections None

Repeat this process as follows, pasting the image on a new layer below the Template layer
in the LP each time beforehand and then moving into position as liked

So for me, it was the eye in the middle, the lips bottom right etc.
Use your image as a guide and see what you want to do - but then when it comes 
to the Selections - 
  • Select the Middle Vertical Row - SID (Selection Invert Delete)
  • Right Vertical Row - same
  • 9 Diamonds in Rows - Horizontal from Top to Bottom - so, select three, miss two, select three, miss two, select three - SID
  • The 4 inner diamonds (not including the central one itself but the 4 that surround it) - SID
Paste your image one more time and move down the LP below the selection diamonds and the template layer

Unhide all the selection cut out pieces you've just created but hide the intact image layer

You will amend the squares and do lovely things in a just a bit - 

♥

Now, to decorate the template with our scraps etc.

Above or Below the Template as stated - 

Rose ele 2

Brad ele 8

 Rose ele 57 

Butterfly ele 23

 Resize all "By Percentage" to 15% of actual size

Place as mine shown - then keep Duplicating, Mirroring, Horizontally or Vertically as needed

Place where liked (or refer to mine)

Ele 59 - Flower

15% resize

Centrally above - then dup and mirror

Ele 11 - Heart Swirl

Place as is shown - left top side - but below the template

Mirror

ele28 -  Flower

resize 20% and place

Now I wanted some "greenery" so made it with Stu's flower
Ele 18
then Recoloured to H 71 S 116
Resized to 40%
then added Greg's Pool Shadow on these settings


Place as mine - below other elements and mirroring as required
Duplicate as much as liked and place as mine or improvise
I put some below flowers, I put some below the template
layer but above the heart swirl layers

(I also recoloured some more of the "green" ones once I'd changed them to green.
and this time I used - 237 and 116 to give a nice purply hue to compliment the original one.
I placed those under the brads layers)

ele 57 - Circle of Stones
Resize by Percentage - 50% twice
then Layers, Move to Bottom and then move it UP the LP (Layer Palette)
so it's above the White background and the hidden Image layer
and place as mine centrally on the left
Then duplicate and mirror to add to all the corners - slightly
adjusting the placement so the stone circles when touching
overlap exactly giving a nice tidy matching finish


Now, keep going with your elements and adding as much OR as little as you wish
Have fun and place where you like or refer to mine

When resizing, paying attention to quality as you do - sharpen any elements that may need it
but take care not to over-sharpen otherwise it'll look harsh

When you've added as much as you're happy with

Get ready for some papering, effects, shadowing and merging etc.

♥

Open Paper 11 - Deep Dark Purple

Res by Percent - 70%

C&P

Place as a new layer below the cut out pieces of image layers in the LP

Duplicate

And with your Magic Wand - 

Select EVERY Square Inner on the Template Layer - all 13 of them

then Do a Selection, Invert, Delete on the Paper layer just below the cut out image layers

Selection None

then

Move this 2nd paper layer down so it's just above the White Background

Hide that one for now

Back to our Template layer

Time to do some Blend Mode adjusting with out cut out squares - 

(Get ready with Magic Wand in
case you need to do a simple Selection of the Template inner area - then Expand and either Promote to Layer to keep pieces you don't want affected by the Blend Mode change OR delete
without Inversion to get rid of any square image pieces)

OK

First Vertical Column of Image

In the LP

Change the blend mode of this one to Overlay

Middle Vertical Column of Images - I liked the "eye" area so I promoted that to it's own layer

but

Change the Blend on the original layer to Screen

Onto to the Right Vertical Column layer

and again, our point of interest - in my case it was the lips - I want to 
keep them as they are so
I magic wand and promoted to layer
then changed the original layer Blend Mode to Soft Light
and finally
the 4 Inner Square layer to Hard Light

OR!

Change these blend modes to suit your own image
You can always change them later if liked

Nearly at the end now

♥
Take your tube - IF and only if you want to
Resize as liked and C&P
Place UNDER the Template layer in the LP
Move your tube within the squares area to a section you'd like
Select the squares - as few or as many as you'd prefer
(I just used the two squares - second in on the right)
and do a SID
That's it for the tube :)
I really don't think after all your hard work you want to cover it
up with a tube of the image but if you'd like to - have at it and enjoy!

♥

Colourise your Template layer to suit your tag colours (if you haven't already done so)
or if you want to be really different
I recoloured my Template to the varying purple codes as above
then
I chose a paper from the kit
Selected the entire template
C&P the paper on the layer just above it
SID
and then
Changed the Blend Mode to Luminance Legacy
and for a bit of extra ta-da
I added Noise to the Paper layer
Gaussian 100 Monochrome

But you go whatever way you'd like :)

Now CROP to Canvas Size of your Tag to ensure any outside edge lurking is gone
Massive image, large tube, huge paper - they lurk about outside the tag canvas area
just waiting to pounce and appear unannounced loL!
So, crop the canvas and they'll be gone

(My size was 750 x 550)

And now DELETE the spare image layer and the spare paper layer
(Why did we have them?  In case we needed them but we don't -  so they can go...)

♥

Add Shadowing to the elements layers and template layer

You can save yourself time and effort by merging together chunks of elements and applying
the shadow to more than one layer at a time
otherwise you'll be at it a while

Look at your LP and check your tag to make sure 
everything that needs a shadow or looks good with one has one

I used this one of mine

I merged together the Circle Stones Layers
the Heart Swirl Layers
and applied the shadow to each layer

then back up to the top of the LP
and start merging element layers together going down
then apply the shadow to the Merged layer once you've got a few
(Turn the Layer Visibility on and off if you need to check the placement on the tag
and what you're actually merging)
Keep going if need be - but don't merge merged layers together otherwise
you'll doubly apply the shadow :)

Once you've applied all your shadows
You can apply a filter to the cut out piece of "paper" if you like
I applied Penta.com Jeans on the default settings
Added just a subtle bit of texture to the Hard Light area
I then added to a couple more of the Blend Mode layers

(Tip: It's these little changes that you make during the tag making process 
that means your tag stands out from the crowd
That you've understood the tweaks/methods/tips and steps
that you learn during the tutorials process and apply them
to your own work - helping to create your own style.
And it's that which makes the difference in tag world)

♥

Finally - Name and Info Time

I applied the name in Black - no Stroke - Unica One - Size 100 - Position 
as mine or wherever you'd like - Convert to Raster and apply shadow
then
Taking a very light colour from the tag
again with No Stroke
I used Sentilum and typed out the name again
or you could perhaps type a phrase or some wordart saying
Either way, type out and convert to Raster 
Tip: if using a very thin, delicate script, duplicate the layer
and they'll show better
Merge the script text layer/s
then add shadow

Now add your Artist's image copyright © and URL, 
Licence if needed/required
your scrapkit designer props
and your tagger info

Press Shift and hold it - then press D to duplicate the entire tag

On the duplicate - delete the White Background and merge

Save as .PNG

Then back to the Original tag canvas and all those lovely layers

Save as PSPImage 

Congrats!

Thank you for trying my tutorial and I hope you have fun with it

This tutorial was written 27th January 2021 by Vix aka Vix PSP
All usual signature tag tutorial disclaimer notice 
and terms of usage apply
No copying, no ripping, no no!
Thank you