Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts

Tuesday, 6 July 2021

Tag Tutorial - Emotional Portrait

 A nice simple tut that can have fantastic results depending on your IMAGE used and how YOU choose to finish it off



Written for my fellow image tag enthusiasts!

(We all LOVE our scrap tags, I absolutely adore creating tags with them but I am also old school and appreciate the beauty of an image tag - made using with masks, filters, brushes, fonts etc -  they are where many of us old timers started and should never be underestimated hehe!)

YOU WILL NEED

Image of Choice - I'm using a gorgeous one by Tatyana aka Ignis Fatuus (one of the few photomanip artists that are still Free to Use and it is very appreciated ♥)

Mask - WSL371 by Chelle WeeScotsLass - can be found at her blogpost HERE

Brushes - I used Lyndie Brushes - 273 004 and 273 003 

(The three squares with the dotted lines at angles brushes used many times in my tags over the years)

But if you don't have these, improvise with any rectangle or right angle shape brushes you may have

Filters Unlimited 2 - Distortion Effects - Ink Blots

Xero Graphics - Porcelain  (optional)

EC 4000 Corona (optional)

♥

F Y I before you go on...

Tag DIMENSIONS to remember -  We are working Portrait not Landscape on this Tag

MAIN TAG CANVAS with White Floodfilled Background Raster Layer - 750 x 800 pixels @72 dpi

THE RESIZE of DUPLICATE IMAGE TO BE MASKED - 410 wide by 538 high or thereabouts

Note: this is a duplicate of your original larger image which you have opened and chosen to use

THREE IMAGE SELECTIONS - 274 x 335 high or thereabouts

Again, this will depend on your own original tag canvas sizings and the size of your mask 

SHADOW for THE SMALLER IMAGE SELECTION PIECES - 

Vertical at 17,

 Horizontal at 14, 

Opacity 27, 

5.00 Blur - 

Colour Black

Remember - You don't have to be exact and follow mine though you can if you'd like :)

It will depend on the original size of your chosen image and how large you like to work and what your groups allow etc.

Just as as long as your dimensions are Portrait - your tag will look similar if you adjust your sizings to match and use your creative eye to see placements and positionings :)

Have fun!

♥

READY?

WALLOP!

Very simple - here we go

♥

Open your main tag canvas - size and spec above


Open your Image 


Duplicate


On the Duplicate resize to somewhere in the region of the above sizing


Minimise the original Image for now and on this duplicate


Apply FU2 - Distortion Filters - Inkblots on the default setting


Once applied


C&P over to the Main Tag Canvas


On there - Apply WSL Mask371 (Fit to LAYER selected)


Layers, Merge, Merge Group


Once applied, use Move Tool and place it top left of the tag canvas


Duplicate


Do not Mirror the image


Simply use move again and using your eye


Move it to the bottom right so it looks good


♥


So for the next part of the tut - you're going to make 3 image selections, all sized the same.


We'll do one - then you do the next two


Start with your ORIGINAL (not the smaller image)


Taking my Image Selection sizings as shown above and remembering we want Portrait spec


Draw out a Rectangle Selection of an interesting part of your image - seriously, don't worry too much about the "dimension" of the selection.  As long as the pieces you "cut" from the image are in proportion to the mask layers and allow room for you to move and play with them, you're grand!

Once drawn

Edit, Cut

Back to the main tag canvas

Edit, Paste as a new Layer

Once you've pasted in the middle of the tag canvas, line up and make sure you like the placement - for this first one you want centred in the middle

When happy with placement - duplicate and on the top copy, Selections, All, Selections, Float, Selections, Defloat - reapply the Inkblot filter, Selections None.

Now you can change the Blend Mode in the Layer Palette to one that suits your image used

I used Overlay, but perhaps, Burn, Hard Light, Soft Light - it will depend on the colours and light of the image you choose.

Once you've done this?  That's the bones of your tag!  You're really just repeating this step above for the next two sections of image you want to highlight in your tag.  It might be the face, eyes, the outfit, sparkles in the background/foreground.  See how beautiful your image is and highlight some key portions of it paying attention to your placement within the selection itself :)

(Oooooooh we're gettin' all faaaaancy ovah heaaaaaaaar!)

Place them top left and bottom right of the tag canvas and move up and down the LP

according to your overlap wishes


And when you have done that?

That's your tag mostly done :)

It's now the time for you to shine and get artistic on that image!

You can do as much or as little of the following steps as you'd prefer but bear in mind that I did most of these to my own tag/s - have a look at the examples and see if you can work out what I did do - hint...it's most of them LOL!

  • Perhaps you'd like just one layer of image section - if placed over the masked areas and Overlay it to highlight it, but make sure you apply a good deep shadow to get it to stand out 

  • Maybe take a larger section in Portrait scale and place it UNDERNEATH the central area  (Ensure you've floated and selected the rectangle image before you apply the filters) and then apply Inkblot again but hit Randomize (as I did!) and then went to PSP's own built in Artistic Effects, and applied Topography on the default setting - nice!

  • Apply Xero Porcelain to the main face image section - default

  • Apply Mosaic Glass on the factory defaults to one of your image close up layers and then change the blend mode of this layer to Screen

  • Apply Ink Blots to one of the image layers without selecting it (Selecting keeps it tidy - not selecting it lets it apply across the whole canvas)  See if that looks good? Hit Randomize to get different results

  • Apply Lyndie Brush 273 003 to the top right area (on a new layer added just above the White Background layer in the LP)

  • Apply Lyndie Brush 273 004 to the bottom right area (again on a new layer) - Use your judgement and your eye to see whether you like the placements.  If you do, great!  If you don't Undo or Delete the brush layer/s and try again
Note: IF you don't have these brushes, improvise by drawing out a Rectangle Preset Shape with a line width of about 2 or 3 in a Line Style of Choice - then erase what you don't need.  You'll get a similar effect :)
  • Take a block font (I used DK Americain) and type out some wordart sized as you would prefer - I used size 48 and two word descriptions inspired by your image. I used words sized 72 and placed in the gap between the brush and image areas or wherever you like the look of them

  • Adjust the Kerning of the words if needed to S P R E A D them out 

  • Apply a EC 4000 Corona highlight if you're using an image that makes the words fade into the background, it'll help them stand out

Once you've added any finishing touches you may like to add

Add your Name, © of Artist and/or Licencing Information and your Taggers Mark

Delete the White Background

Save a Copy of your Work as a PNG

Save the Original Tag Canvas as a PSPImage in case you'd like to come back to it again :)

That's it!

Hope you enjoyed this simple but effective tut

Hugs y'all!

This tutorial was written 5th and 6th July 2021 by Vix aka VixPSP
Based on a tag made by me for an Image Inspiration Challenge in Creative Misfits
All usual PSP tutorial disclaimer notices, conditions and terms of usage apply
Thank you
Oh and remember - when working with images and tubes that are Free to Use
Make sure you have either General Permission 
(i.e. permission is given on the artist's website that you may use the image/s) 
OR Personal Permission to use the © Image
(i.e. you've personally written to the artist and they have allowed you to use it)

Group Permissions to use images and artwork DO NOT cover you for posting your tags or 
using for tutorials outside of your Group/s, unless your Group states this IS the case.

Check before you use if you are unsure.

Thursday, 28 January 2021

Tutorial - Steam Dream

 Steam Dream



Tube/Image © Verymany used with licence

Scrapkit "Steampunk Mysteries" by Curious Creative Dreams

Both of these are not to be used without licence or purchase so if you don't have these particular
designs, then improvise with your own collection

Template - I made a very quick simple "template" purely for this tutorial from one of 
Shawna's PSP shapes. (Scrap Stuff with PSP)
It asks for a mention in the TOU which I'm doing (Thank you, Shawna) and I would direct you to download the shape yourselves but the site hasn't been updated in 11 years and many of the links no longer work - so for speed, ease and the purpose of this tut, I've templated this shape only xx

You can get it by clicking on the image below and then right click save


Fonts of Choice

♥

Find whatever kit you choose to use
and use my tutorial as a guide/example for placement and resizing's
Look for a kit which is similar in element types along the same
theme lines and you should be fine

Please assume that if I mention an element in a 
tutorial step (and it's ending up on the tag canvas)
How does it get there every time unless otherwise stated?
Exactly - lol!
C&P
So, do that :) xx  every time!

(This will be the most detailed of the scrap tutorials on this new blogsite
 - so you can refer back to it in future as I will shorthand it from now on)

♥

Open the Template I've supplied

Open your chosen large image

Copy and Paste onto your working canvas

Rename your template layer TEMPLATE or similar - you'll be glad you did and you
can use it as a reference point when moving stuff up and down the LP (Layer Palette)

Line up the image with a "point of interest" somewhere well within the diamonds area

(For instance, on mine, I used that gorgeous choker stone in the bottom left as a guide)

(Tip: Keep your Image in your Clipboard so you can keep pasting as needed)

Now - taking magic wand on the usual Selection settings



Select inside the three diamond son the left side from top to bottom vertically

Selections, Expand by 3, Invert and hit Delete the excess Image on the layer

Selections None

Repeat this process as follows, pasting the image on a new layer below the Template layer
in the LP each time beforehand and then moving into position as liked

So for me, it was the eye in the middle, the lips bottom right etc.
Use your image as a guide and see what you want to do - but then when it comes 
to the Selections - 
  • Select the Middle Vertical Row - SID (Selection Invert Delete)
  • Right Vertical Row - same
  • 9 Diamonds in Rows - Horizontal from Top to Bottom - so, select three, miss two, select three, miss two, select three - SID
  • The 4 inner diamonds (not including the central one itself but the 4 that surround it) - SID
Paste your image one more time and move down the LP below the selection diamonds and the template layer

Unhide all the selection cut out pieces you've just created but hide the intact image layer

You will amend the squares and do lovely things in a just a bit - 

♥

Now, to decorate the template with our scraps etc.

Above or Below the Template as stated - 

Rose ele 2

Brad ele 8

 Rose ele 57 

Butterfly ele 23

 Resize all "By Percentage" to 15% of actual size

Place as mine shown - then keep Duplicating, Mirroring, Horizontally or Vertically as needed

Place where liked (or refer to mine)

Ele 59 - Flower

15% resize

Centrally above - then dup and mirror

Ele 11 - Heart Swirl

Place as is shown - left top side - but below the template

Mirror

ele28 -  Flower

resize 20% and place

Now I wanted some "greenery" so made it with Stu's flower
Ele 18
then Recoloured to H 71 S 116
Resized to 40%
then added Greg's Pool Shadow on these settings


Place as mine - below other elements and mirroring as required
Duplicate as much as liked and place as mine or improvise
I put some below flowers, I put some below the template
layer but above the heart swirl layers

(I also recoloured some more of the "green" ones once I'd changed them to green.
and this time I used - 237 and 116 to give a nice purply hue to compliment the original one.
I placed those under the brads layers)

ele 57 - Circle of Stones
Resize by Percentage - 50% twice
then Layers, Move to Bottom and then move it UP the LP (Layer Palette)
so it's above the White background and the hidden Image layer
and place as mine centrally on the left
Then duplicate and mirror to add to all the corners - slightly
adjusting the placement so the stone circles when touching
overlap exactly giving a nice tidy matching finish


Now, keep going with your elements and adding as much OR as little as you wish
Have fun and place where you like or refer to mine

When resizing, paying attention to quality as you do - sharpen any elements that may need it
but take care not to over-sharpen otherwise it'll look harsh

When you've added as much as you're happy with

Get ready for some papering, effects, shadowing and merging etc.

♥

Open Paper 11 - Deep Dark Purple

Res by Percent - 70%

C&P

Place as a new layer below the cut out pieces of image layers in the LP

Duplicate

And with your Magic Wand - 

Select EVERY Square Inner on the Template Layer - all 13 of them

then Do a Selection, Invert, Delete on the Paper layer just below the cut out image layers

Selection None

then

Move this 2nd paper layer down so it's just above the White Background

Hide that one for now

Back to our Template layer

Time to do some Blend Mode adjusting with out cut out squares - 

(Get ready with Magic Wand in
case you need to do a simple Selection of the Template inner area - then Expand and either Promote to Layer to keep pieces you don't want affected by the Blend Mode change OR delete
without Inversion to get rid of any square image pieces)

OK

First Vertical Column of Image

In the LP

Change the blend mode of this one to Overlay

Middle Vertical Column of Images - I liked the "eye" area so I promoted that to it's own layer

but

Change the Blend on the original layer to Screen

Onto to the Right Vertical Column layer

and again, our point of interest - in my case it was the lips - I want to 
keep them as they are so
I magic wand and promoted to layer
then changed the original layer Blend Mode to Soft Light
and finally
the 4 Inner Square layer to Hard Light

OR!

Change these blend modes to suit your own image
You can always change them later if liked

Nearly at the end now

♥
Take your tube - IF and only if you want to
Resize as liked and C&P
Place UNDER the Template layer in the LP
Move your tube within the squares area to a section you'd like
Select the squares - as few or as many as you'd prefer
(I just used the two squares - second in on the right)
and do a SID
That's it for the tube :)
I really don't think after all your hard work you want to cover it
up with a tube of the image but if you'd like to - have at it and enjoy!

♥

Colourise your Template layer to suit your tag colours (if you haven't already done so)
or if you want to be really different
I recoloured my Template to the varying purple codes as above
then
I chose a paper from the kit
Selected the entire template
C&P the paper on the layer just above it
SID
and then
Changed the Blend Mode to Luminance Legacy
and for a bit of extra ta-da
I added Noise to the Paper layer
Gaussian 100 Monochrome

But you go whatever way you'd like :)

Now CROP to Canvas Size of your Tag to ensure any outside edge lurking is gone
Massive image, large tube, huge paper - they lurk about outside the tag canvas area
just waiting to pounce and appear unannounced loL!
So, crop the canvas and they'll be gone

(My size was 750 x 550)

And now DELETE the spare image layer and the spare paper layer
(Why did we have them?  In case we needed them but we don't -  so they can go...)

♥

Add Shadowing to the elements layers and template layer

You can save yourself time and effort by merging together chunks of elements and applying
the shadow to more than one layer at a time
otherwise you'll be at it a while

Look at your LP and check your tag to make sure 
everything that needs a shadow or looks good with one has one

I used this one of mine

I merged together the Circle Stones Layers
the Heart Swirl Layers
and applied the shadow to each layer

then back up to the top of the LP
and start merging element layers together going down
then apply the shadow to the Merged layer once you've got a few
(Turn the Layer Visibility on and off if you need to check the placement on the tag
and what you're actually merging)
Keep going if need be - but don't merge merged layers together otherwise
you'll doubly apply the shadow :)

Once you've applied all your shadows
You can apply a filter to the cut out piece of "paper" if you like
I applied Penta.com Jeans on the default settings
Added just a subtle bit of texture to the Hard Light area
I then added to a couple more of the Blend Mode layers

(Tip: It's these little changes that you make during the tag making process 
that means your tag stands out from the crowd
That you've understood the tweaks/methods/tips and steps
that you learn during the tutorials process and apply them
to your own work - helping to create your own style.
And it's that which makes the difference in tag world)

♥

Finally - Name and Info Time

I applied the name in Black - no Stroke - Unica One - Size 100 - Position 
as mine or wherever you'd like - Convert to Raster and apply shadow
then
Taking a very light colour from the tag
again with No Stroke
I used Sentilum and typed out the name again
or you could perhaps type a phrase or some wordart saying
Either way, type out and convert to Raster 
Tip: if using a very thin, delicate script, duplicate the layer
and they'll show better
Merge the script text layer/s
then add shadow

Now add your Artist's image copyright © and URL, 
Licence if needed/required
your scrapkit designer props
and your tagger info

Press Shift and hold it - then press D to duplicate the entire tag

On the duplicate - delete the White Background and merge

Save as .PNG

Then back to the Original tag canvas and all those lovely layers

Save as PSPImage 

Congrats!

Thank you for trying my tutorial and I hope you have fun with it

This tutorial was written 27th January 2021 by Vix aka Vix PSP
All usual signature tag tutorial disclaimer notice 
and terms of usage apply
No copying, no ripping, no no!
Thank you











Monday, 25 January 2021

Tutorial - Sweet Memories



SUPPLIES NEEDED

 Tube of Choice - I'm using a beautiful one by © Anna Liwanag which I purchased from CDO and am using with licence.  If you don't have or wish to use the same tube, use one that you have permission or licence to use.

Lots of Filters - including

Mura Meister Copies

Graphics Plus - Quick Tile 1

Eye Candy 4000 HSB Noise

Xero Greytinter/Scaler

Toadies - What are You?

Jeux de Lignes Entrelacement

♥

Ready to rock 'n roll?

Let's do this thing!

Open a New Image in PSP - 650 px by 550px at 72 dpi

Open your chosenTube

C&P at full size

Place on the working canvas/tag area/call it what ya like

Mura Meister Copies - Wallpaper - default setting

Once applied - Crop Tool, Crop to Merged Opaque (i.e. the current image size of 650 x 550)

Duplicate the layer

Top Copy - Adjust Blur Gaussian 2.00

Change to Soft Light or similar

Apply Xero Greytinter on 0 or Greyscaler - same effect on those settings lol!

If you then turn the opacity on and off between the two layers

you'll see the difference is subtle - only subtle as the tube is gorgeous

and doesn't require much floof!

Hide White Background

Merge Visible to the two wallpaper tube layers

Unhide

♥

Now have your Selection Tool on Square

Starting at the top left of the tag area

Draw out a Square and keep going until you're about 8 pixels or so away from touching the bottom of the image canvas

Go to Selections, Edit Selections and you'll see it's gone Red and the little vavavoom lines aren't dancing about around the outside of the selection at the moment.  That's fine.

Now go to your Move Tool

Tap on the Red Area and move the redness more into the centre (or any other part of the working canvas where the Wallpaper has highlighted a part of pretiness or interest - just make sure it's still all within the tag area i.e. we can see it and it's not outside the canvas.)

Once you've placed where you like - return to Selections and in the DD menu hit Edit Selection once more.

The redness will go and the voom lines are back!

Making sure you're on the layer in the LP - Selections, Invert and hit Delete

Selections None

Now go to Objects - Align - Centre in Canvas

♥

So now we have a nicely cut "background" to work with and the White Background showing

On the working background layer

Duplicate

Hide the bottom copy and with the top one active

Go to Graphics Plus - Quick Tile 1 - on the default settings

(all three sliders will be on 128)

Apply

Now, resize this layer in your Image, Resize by 80%

Then back into Graphics Plus

and reapply the same filter as before


You'll now have 4 squares of 4 squares?
I hope!

If you haven't - try moving the QT sliders until you get something similar
but I am hoping that the GP plug in is set so the thresholds of tiling are the same
regardless of image used etc.
See how you get on...fiddle about until it looks like mine..ish!

♥

Duplicate this layer

and on the bottom version of it
In your Materials Palette
Change both of your colours to White
then go to 
Toadies - What are You?
and at 20 on X Dose and Y Dose sliders (default)
Apply
then go to 
Jeux de Ligne Entrelacement
and change the Espacement Slider to 25




So now, unhide the other Quick Tiled layer

Pick a colour using your Dropper tool - I went for a lovely shade from my tubes hair
#9f7d6f

Take your Preset Shape Rectangle with the Line Width of 9.00 on Solid Line

On the Right side of your tag

Top Square area - Top Left of Square with the 4 sections layer as a guide

Draw out a Square shape

Once drawn out and converted to Raster

You can then jiggle it about to line it up a little more if liked

Then

Right click on this layer in the LP

Image - Mirror - Mirror Vertical

It should like up with the bottom right square area

Again, if not, jiggle it a little so it does

Repeat this step for the other two areas

SO you now have four rectangle frame layers
beautifully framing the effect main areas?

Good

Onwards!

♥

Unhide the copy of the first "background" layer we used
With one of these layers
making sure in the LP they are below the 
other effect layers
Move it within the right top square area
Do a Magic Wand Selection in both the TOP and BOTTOM right 
areas and Invert, Delete to cut the image

You can - if you'd like - for complete symmetry, duplicate the working background
cut area and mirror place on the left
but I liked some of the effect showing so I left it

♥

Taking your Rectangle Shape again

This time with the Fill on a variant colour for your tag
I went for a nice Caramel to compliment my first colour - so this
one was #c7b3ab

Look to your central tag section
And draw out a long vertical rectangle for the central tag area
Go from top to bottom and line up with the thick lines from Entrelacement
for placement...boom boom!
OK
Once you've done that
Convert to Raster

Swap your colour in the MP - bottom box
to either White or Black or a colour of choice
No Stroke
Take a nice Sans Serif font
(I used Poppins - Size 26
and the words Memories Sweet Memories)
Create as Vector
Type out your chosen words
Happy with the Length of the Text to Rectangle Ratio?
Convert to Raster
and Rotate it to place over your middle vertical rectangle area
Once you've done that - apply a crisp drop shadow to the text
(I used 1, 1, 21, 1.00 Black and applied it twice)

♥

At this point - IF you like much bigger tags - resize your working area as liked
OK?
So now - 
Open your tube (if you closed it)
Copy
Resize as preferred
and place where liked on the canvas

If needed, do a selection invert delete on a duplicated
tube to make it look like it's emerging from your frame
But if you use a full bodied or sitting one - do this or not - it's your choice :)

On the Opposite side where you've placed your tube (so mines on the right)
C&P the larger or CU version if you have one
Place within the frame area
(and in the LP it will be BELOW the frame layer but
above the other effect layers)
Once placed
Do an Invert Delete
Change the Blend Mode something that compliments
your tube
I went for Hard Light
and dropped the Opacity to 59 
then
Duplicated
and on the 2nd copy of this layer
changed the Opacity to 24

♥

Finishing Touches now!

Do another Merged Opaque crop - i.e. Crop your canvas to the size you want it for tags
Sharpen anything that needs sharpening only if needed
Then - add some noise to your frames using
Eye Candy on these settings

Hit Random Seed before you apply it
to each frame to give a different swoosh

I then glittered up my frames using 
Adjust Add/Remove Noise/Add Noise/50 Gaussian Monochrome Ticked
but you can go madder or more subtle if you'd prefer

Apply a subtle dropshadow to the frames and the middle rectangle layers
I used the same as before

Add your name in a font of choice with a drop of choice
and place where it looks best on your tag

Add your Artist © and/or licence info and your taggers info

Delete the White Background

Shift and hold D to duplicate

Save that duplicated one as a PNG

and

Save your ORIGINAL one as PSPImage in case you
need to come back, make changes, add names for offers etc.

That's it!

Hope you enjoyed this tutorial and if you make one and
would like to show me?
Smashing!
I'll add it to the bottom of this page if it's beeyoooooooutiful too :D